SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Santee_Native on April 12, 2013, 01:34:38 PM

Title: Carb help
Post by: Santee_Native on April 12, 2013, 01:34:38 PM

What screw driver do I need too remove this? And where do I find one? (https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fi240.photobucket.com%2Falbums%2Fff266%2Fdesertmiked%2FACBB0267-5406-49B1-8C4D-F4CBB43274E9-1422-0000009101FB4C52_zps44346398.jpg&hash=ed3be8c23cfac0f7cef672656b197257a0ec3fb7) :screwy:

Title: Re: Carb help
Post by: mash on it on April 12, 2013, 01:38:09 PM

Butterfly bit or clutch bit, found at Home depot speed and marine  ;)
Found it with a bunch of other regular phillips and flat bit/set

Danl

Title: Re: Carb help
Post by: Santee_Native on April 12, 2013, 02:06:32 PM

Sweet thanks

Title: Re: Carb help
Post by: SoCalPSD on April 12, 2013, 02:09:56 PM

I have used a flat head and gotten away with it. Just gotta be careful not to gouge or score it and leave little burrs that could potentially fall off and clog a jet

Title: Re: Carb help
Post by: sjackson007 on April 12, 2013, 08:03:19 PM

I bought mine at ace hardware.

Sent from my Galaxy Nexus using SoCalJetBoats mobile app