SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: crusader1983 on March 24, 2009, 12:11:14 PM

Title: Carb rebuild
Post by: crusader1983 on March 24, 2009, 12:11:14 PM

Does anyone know of a good place in OC or corona/norco/riverside area to get a edelbrock marine carb rebuilt?

Title: Re: Carb rebuild
Post by: Ford545 on April 27, 2009, 09:00:54 PM

I can do it for you. $100 and I buy the rebuild kit or $50 and you buy the rebuild kit. Can have it done in one day.

Title: Re: Carb rebuild
Post by: BOOST on April 27, 2009, 09:07:33 PM

 Dave Lang over at Fuel curve west.  http://fuelcurvewest.net/

Title: Re: Carb rebuild
Post by: bertus on April 27, 2009, 10:01:41 PM

I have to say is dave is the man.  Dialed in my carb and now the crusader runs titties... ;D

Title: Re: Carb rebuild
Post by: Ford545 on April 28, 2009, 11:01:41 PM

Dave did my first set of carbs on my tunnel ram. He does good work. But like everything else in this world it is alot cheaper to do it yourself or have a buddy do it for you. I have since done all my carbs and numerous others for friends. Ended up with what seemed to be the same end prodeuct as dave. Hope you get your carb rebuilt one way or another crusader1983.

Title: Re: Carb rebuild
Post by: btnhtillidie on May 02, 2009, 06:06:56 AM

you can honestly do it your self with and Edelbrock. that's how I taught my self.

Title: Re: Carb rebuild
Post by: povertyjet on May 02, 2009, 06:14:17 AM

Edelbrocks are VERY easy to rebuild...alot easier and fewer parts than Holley. Kits are about $40-$45.

p-jet