Carb rebuild

« **on:** March 24, 2009, 12:11:14 pm »

Does anyone know of a good place in OC or corona/norco/riverside area to get a edelbrock marine carb rebuilt?

« **Reply #1 on:** April 27, 2009, 09:00:54 pm »

I can do it for you. $100 and I buy the rebuild kit or $50 and you buy the rebuild kit. Can have it done in one day.

« **Reply #2 on:** April 27, 2009, 09:07:33 pm »

Dave Lang over at Fuel curve west. http://fuelcurvewest.net/

« **Reply #3 on:** April 27, 2009, 10:01:41 pm »

I have to say is dave is the man. Dialed in my carb and now the crusader runs titties...

« **Reply #4 on:** April 28, 2009, 11:01:41 pm »

Dave did my first set of carbs on my tunnel ram. He does good work. But like everything else in this world it is alot cheaper to do it yourself or have a buddy do it for you. I have since done all my carbs and numerous others for friends. Ended up with what seemed to be the same end prodeuct as dave. Hope you get your carb rebuilt one way or another crusader1983.

« **Reply #5 on:** May 02, 2009, 06:06:56 am »

you can honestly do it your self with and Edelbrock. that's how I taught my self.

« **Reply #6 on:** May 02, 2009, 06:14:17 am »

Edelbrocks are VERY easy to rebuild...alot easier and fewer parts than Holley. Kits are about $40-$45.

p-jet

crusader1983

Carb rebuild

Ford545

Re: Carb rebuild

BOOST

Re: Carb rebuild

bertus

Re: Carb rebuild

Ford545

Re: Carb rebuild

btnhtillidie

Re: Carb rebuild

povertyjet

Re: Carb rebuild