SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: 2savage4you on April 27, 2008, 06:47:23 AM

Title: Chevy alternator mounting
Post by: 2savage4you on April 27, 2008, 06:47:23 AM

Chevy guy's can you post up a pic on how you have your alternator mounted , if you use special mounts (custom) or just some old ugly ass brackets......I need to mount mine , but dont have a clue where to put it...

Thanks ;D

2sav

Title: Re: Chevy alternator mounting
Post by: FORKEDUP on April 27, 2008, 07:38:38 AM

here is a thread i had awhile back, shows mine and some others as well as some input on the subject, hope it helps :)
http://www.socaljetboats.com/index.php?topic=2442.0

Title: Re: Chevy alternator mounting
Post by: Oldsquirt on April 27, 2008, 09:33:15 AM

2sav, in your Bahner thread there's a pic of your front motor plate. On the left side of the plate there is a hole that I'm sure was the alternator mount/pivot. Run an adjusting bar to one of the accessory mount holes in the head. Looks like there --might-- be some clearance issues with the header water lines, though.

Title: Re: Chevy alternator mounting
Post by: TJS Nordic on April 27, 2008, 02:06:55 PM

Here is mine. I think I got the bracket at DANA maybe. I also thought it was going to be too close to the water lines but there is plenty of room.
T.J.

(https://www.socaljetboats.com/proxy.php?request=http%3A%2F%2Fwww.tjsperformance.com%2Fimages%2Fnordic76.jpg&hash=3265ab8fca744b1eca3edd7ece0156531db2fd31)