SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: RockyCapone on March 11, 2013, 09:23:30 AM

Title: Crankcase Evacuation System
Post by: RockyCapone on March 11, 2013, 09:23:30 AM

Can a Crankcase Evacuation System be used if you still use water injection with Bassetts?
Typical set I was thinking about  http://www.jegs.com/i/Moroso/710/25900/10002/-1 (http://www.jegs.com/i/Moroso/710/25900/10002/-1)

Title: Re: Crankcase Evacuation System
Post by: Beaveretriever on March 11, 2013, 02:12:20 PM

yes they can. I ran them on my flat bottom. Therr are a few people that run them as well. Just make sure you follow the directions when you put them in the collectors. There is a proper way to do it.

Title: Re: Crankcase Evacuation System
Post by: RockyCapone on March 11, 2013, 03:05:16 PM

Quote from: Beaveretriever on March 11, 2013, 02:12:20 PM

yes they can. I ran them on my flat bottom. Therr are a few people that run them as well. Just make sure you follow the directions when you put them in the collectors. There is a proper way to do it.

Ok thanks for the info.