Tech Talk => Engine Mechanical / Electrical => Topic started by: DOZZR on April 27, 2010, 07:46:44 PM
Title: discouraged...but not for long
Post by: DOZZR on April 27, 2010, 07:46:44 PM
Once again i have been thrown into rotating assy, hell. I have been down since the Avi run, but finally i see some light, and dam is it bright ;D I will keep it short but definately sweet, chevy 454 30 over, solid roller cam assy 645/655, 990's, stainless valves, upgraded retainers/springs, 3/8 pushrods eagle rods, forged crank.......x2 damit lol Je blower pistons, studded mains/heads, weiand blower, 15% overdriven, dual 750's 1 to1 ratio mechanical secondaries jetted @ 91 all 8 corners (thats gonna make my azz pucker at the pump) I had it on the water for about a minute and a half and it just didnt feel right, tore it back down and the crank had been welded and for whatever reason chewed up a main brng. back to the builder, and it should be back by the end of this week. Here is a lil teaser ,for me or you...I'm not sure...dam that thing had some power....for a second anyway.........enjoy