SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Racerman16 on July 17, 2012, 02:45:18 PM
-
I have a 72 ford 351w. It has points in it now and I want to upgrade to a hei. I've ordered two different ones already and they are the wrong ones. Does anyone have a part number for the correct distributor I need or maybe a on for the pertronix electric upgrade for my dizzy. Thanks.
-
Get a MSD for it you'll be happy, look them up msd.com
-
Thanks. I don't want to have to run a box or anything. And the one they have listed doesn't look like the one I need.
-
What is the problem you're having with the replacement distributors? Post pics if you can.
-
I have a 72 ford 351w. It has points in it now and I want to upgrade to a hei. I've ordered two different ones already and they are the wrong ones. Does anyone have a part number for the correct distributor I need or maybe a on for the pertronix electric upgrade for my dizzy. Thanks.
What distributor do you have?
What kit are you trying to get?
I have three or four modules here at the house from when I had my shop....Keep em because all my buddies still have boats...
There are a few distributors that are a bitch to figure out, on those I just get the whole distributor.
GT
-
Try D.U.I. distributors. Never had a problem with getting the correct on my friends ford 460. Gotta go wash my keyboard after spelling the f word....LOL!
http://www.performancedistributors.com/forddistributors.htm (http://www.performancedistributors.com/forddistributors.htm)
-
First I'm an idiot and didn't realize it was a marine block(previous owner said it was a motor out of a truck) so I originally tried to get a 351w dizzy. It has a lip on it where it goes into the block and won't fit. The dis I pulled out is totally smooth. My iPad won't let me post pics but I can email them to you. There is no name on my original dis but there are a bunch of numbers. I've tried to look them up but no luck. I bought a pertronix part number 1281 but it wouldn't fit into the dis housing. Honestly I don't want to spend 250 or more on a dis. The boat isn't worth much itself. Ya I run Chevy in all my stuff and the is the first ford that I've ever messed with.
-
What's wrong with the dizzy in it now? Is it rebuildable?
-
There is literally no difference between a marine block VS. automotive, truck or otherwise....
There are however two versions of the 351.
There is the Windsor version (small) and the Cleveland version (bigger).
Don't know what you mean by ridge... :-\
-
Look at where the dis slides into the block on this one. It's smooth. It's just like the original dis that came out.
http://www.ebay.com/itm/380369829571?_trksid=p5197.c0.m619#ht_2708wt_922 (http://www.ebay.com/itm/380369829571?_trksid=p5197.c0.m619#ht_2708wt_922)
This is the only one I can seem to get. It has a slight lip on it that won't go into the block.
http://www.ebay.com/itm/PROCOMP-BB-FORD-50000-VOLT-HEI-DISTRIBUTOR-429-460-BBF-/230826345643?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35be5284ab&vxp=mtr (http://www.ebay.com/itm/PROCOMP-BB-FORD-50000-VOLT-HEI-DISTRIBUTOR-429-460-BBF-/230826345643?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35be5284ab&vxp=mtr)
I hate points and don't want to run them. My original dis is reusable but I can't find the fit electronic upgrade for it. Pertronix keeps telling me that the pn 1281 is the one I need but it won't fit in the housing. I'm 95 percent sure it's a Windsor. The heads are about the same size as a Chevy head.
-
Look at where the dis slides into the block on this one. It's smooth. It's just like the original dis that came out.
http://www.ebay.com/itm/380369829571?_trksid=p5197.c0.m619#ht_2708wt_922 (http://www.ebay.com/itm/380369829571?_trksid=p5197.c0.m619#ht_2708wt_922)
This is the only one I can seem to get. It has a slight lip on it that won't go into the block.
http://www.ebay.com/itm/PROCOMP-BB-FORD-50000-VOLT-HEI-DISTRIBUTOR-429-460-BBF-/230826345643?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35be5284ab&vxp=mtr (http://www.ebay.com/itm/PROCOMP-BB-FORD-50000-VOLT-HEI-DISTRIBUTOR-429-460-BBF-/230826345643?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35be5284ab&vxp=mtr)
I hate points and don't want to run them. My original dis is reusable but I can't find the fit electronic upgrade for it. Pertronix keeps telling me that the pn 1281 is the one I need but it won't fit in the housing. I'm 95 percent sure it's a Windsor. The heads are about the same size as a Chevy head.
It should be a Windsor, but you are showing a big block distributor......
Do you have the model number of your original distributor? I do not believe a 1281 will fit anything but a Motorcraft distributor.....Do you really have a Motorcraft distributor? I'm betting not. More than likely a Mallory. which should take a 7ML-181...
Picture of your distributor?
-
2pb314 or L512 are the numbers on the original dis. If you give me an email I can send you pics. I can't upload pics here for some reason
-
.