SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: eliminator18 on April 29, 2016, 06:10:42 AM

Title: Diy header water lines
Post by: eliminator18 on April 29, 2016, 06:10:42 AM: Looking to make my own water lines, does anyone know where I can purchase all the different fittings and lines from?

Sent from my iPhone using SoCal Jet Boats
Title: Re: Diy header water lines
Post by: steves86ta on April 29, 2016, 06:38:09 AM: Quote from: eliminator18 on April 29, 2016, 06:10:42 AM
Looking to make my own water lines, does anyone know where I can purchase all the different fittings and lines from?

Sent from my iPhone using SoCal Jet Boats
G&j aircraft in Ontario
Title: Re: Diy header water lines
Post by: GT Jets on April 29, 2016, 07:32:44 AM: McMaster Carr.

Sent from my SCH-I545 using SoCal Jet Boats mobile app
Title: Re: Diy header water lines
Post by: eliminator18 on April 29, 2016, 09:02:29 AM: Thanks guys

Sent from my iPhone using SoCal Jet Boats
Title: Re: Diy header water lines
Post by: eliminator18 on April 29, 2016, 04:33:13 PM: Does anyone happen to know the part numbers for McMaster car??

Sent from my iPhone using SoCal Jet Boats
Title: Re: Diy header water lines
Post by: GT Jets on April 29, 2016, 06:04:57 PM: Quote from: eliminator18 on April 29, 2016, 04:33:13 PM
Does anyone happen to know the part numbers for McMaster car??

Sent from my iPhone using SoCal Jet Boats

For what? Your not very specific.
Title: Re: Diy header water lines
Post by: eliminator18 on April 30, 2016, 12:28:19 PM: Just wondering if anyone knew the part numbers for these water line fittings, trying to order them from mcmastercar

Sent from my iPhone using SoCal Jet Boats
Title: Re: Diy header water lines
Post by: GT Jets on April 30, 2016, 02:04:18 PM: Quote from: eliminator18 on April 30, 2016, 12:28:19 PM
Just wondering if anyone knew the part numbers for these water line fittings, trying to order them from mcmastercar

Sent from my iPhone using SoCal Jet Boats

Not going to happen.

You will need to fabricate that part.
Title: Re: Diy header water lines
Post by: Driver4r on May 22, 2016, 10:52:04 AM: This topic is about a month old, but I feel I can contribute. Those are just standard AN/JIC fittings, any Big automotive warehouse carries them also (summit/speedway/jegs)
The nut should say if its a 4/5/6 an, I cant tell you that, but I can link speedway. You will need a flaring tool though that can flare 37*. They say they are for aluminum, but they work for steel line.

http://www.speedwaymotors.com/Aluminum-Tube-Nut-Coupler-AN6-3-8-Inch,34192.html (http://www.speedwaymotors.com/Aluminum-Tube-Nut-Coupler-AN6-3-8-Inch,34192.html)

http://www.speedwaymotors.com/Aluminum-Tube-Nut-Sleeve-6-AN-3-8-Inch,34353.html (http://www.speedwaymotors.com/Aluminum-Tube-Nut-Sleeve-6-AN-3-8-Inch,34353.html)