SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Dirty Air on February 25, 2011, 12:45:00 AM

Title: driveline U-joimts 1310 or 1350?
Post by: Dirty Air on February 25, 2011, 12:45:00 AM

Sorry it this topic has already been covered, looked but did not see any thread. Where is the line in the sand on these two U-joints?  ...Is it horse power 600hp,700hp,800hp or is it torque# or impeller cut or boat weight. (or driver weight) ....Your thoughts?

Title: Re: driveline U-joimts 1310 or 1350?
Post by: mash on it on February 25, 2011, 09:07:59 AM

1310                    1,600 LB/FT

1330                       1,800 LB/FT

1350                       2,260 LB/FT

1410                       2,700 LB/FT

1480                       3,300 LB/FT

(driver weight and size of right foot ;D)

Daniel
Mash on it

Title: Re: driveline U-joimts 1310 or 1350?
Post by: Dirty Air on February 25, 2011, 09:45:13 AM

Quote from: mash on it on February 25, 2011, 09:07:59 AM

1310                    1,600 LB/FT

1330                       1,800 LB/FT

1350                       2,260 LB/FT

1410                       2,700 LB/FT

1480                       3,300 LB/FT

(driver weight and size of right foot ;D)

Daniel
Mash on it

Really!....well I guess with a 1310 im over 100% overkill untill i factor this part in........[attachimg=1]