SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: el mojado on October 01, 2014, 03:53:43 PM

Title: Engine cuts out
Post by: el mojado on October 01, 2014, 03:53:43 PM

This past weekend was the maiden voyage of my project. It went mostly well. Needs a starter. But my concern is that it was turning off when I would hit a wake kinda hard. Any ideas? I checked all electrical terminals and they were all tight. Could it be carb related? Its running a vac sec 750 holley

Sent from my SCH-I535 using SoCalJetBoats mobile app

Title: Re: Engine cuts out
Post by: cuz_im_CR on October 01, 2014, 07:21:18 PM

Quote from: el mojado on October 01, 2014, 03:53:43 PM

This past weekend was the maiden voyage of my project. It went mostly well. Needs a starter. But my concern is that it was turning off when I would hit a wake kinda hard. Any ideas? I checked all electrical terminals and they were all tight. Could it be carb related? Its running a vac sec 750 holley

Sent from my SCH-I535 using SoCalJetBoats mobile app

So I know you said you checked electrical connections but mine was doing something similar and it ended up being the wires to my key switch were loose.

Title: Re: Engine cuts out
Post by: crewchief22 on October 02, 2014, 05:57:24 AM

Sounds more like an electrical issue than fuel. 

Title: Re: Engine cuts out
Post by: Squirrel Master on October 02, 2014, 06:01:24 AM

X2

Sent from my SPH-L900 using SoCal Jet Boats mobile app

Title: Re: Engine cuts out
Post by: el mojado on October 02, 2014, 12:58:50 PM

I'll start checking this weekend

Sent from my SCH-I535 using SoCalJetBoats mobile app