SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Fordhamram6 on May 07, 2007, 05:23:31 PM
-
Anyone have extra Boat motors laying around, I just purchased a project boat but need to get an engine for it. Ideally looking for a Olds motor, or Chevy probably......
-
i have one, but it's blown injected(big money) But here one I find 454 DID SOMEONE SAY BIG BLOCK ?!! - $1600
--------------------------------------------------------------------------------
Reply to: sale-324622989@craigslist.org
Date: 2007-05-04, 6:44PM PDT
CHEVY-GMC 454 FOR SALE CHECK IT OUT
I PUT THIS MOTOR TOGETHER FOR A GUY AND IT DIDNT FIT ! NOW IM STUCK WITH IT AND ITS GOT LOTS OF TIME AND NEW PARTS PUT INTO IT . CHECK OUT THE PIC AND LIST OF THINGS DONE TO IT .
EDELBROCK INTAKE FRESHLY INSTALLED WITH NEW GASKETS
EDELBROCK CARBURATOR MODEL 1406
NEW OIL PAN GASKET INSTALLED
NEW FUEL PUMP INSTALLED
NEW WATER PUMP INSTALLED
EXHAUST MANIFOLDS ( NO SMOG TUBES ) INSTALLED WITH NEW GASKETS AND STUDS
PULLEY SYSTEM INCLUDING NEW ALT AND USED PS PUMP WITH REMOTE RESIVOIR
NEW SPARK PLUGS GAPPED FOR HEI
INCLUDES FLEX PLATE
COMPRESSION CHECKED ALL CYLINDERS EVEN AND AT 150 - block casting # 3999289
760 275 0833 EL CAJON AREA
Location: EL CAJON
it's NOT ok to contact this poster with services or other commercial interests
PostingID: 324622989
-
ive got a olds 350 needs a crank kit
-
Anyone have extra Boat motors laying around, I just purchased a project boat but need to get an engine for it. Ideally looking for a Olds motor, or Chevy probably......
NO LONGER AVAILABLE
-
Buy this engine before I do something stupid and buy another boat, like a Crusader tunnel drag boat and I put this Olds engine in it. :D I don't need another freakin' boat! :D
-
how much money are you going to spend? I have a 454 chevy with a blower and injection on it.
-
how much money are you going to spend? I have a 454 chevy with a blower and injection on it.
I'll trade your 454 for my 455. Come on brother upgrade! That's 1 more c.i. that you don't have... :D
-
i bet you want to trade! hahaha But it's a bored to a 509. mine 54 inches bigger. ;D
-
... mine 54 inches bigger. ;D
I just qouted you on that one. ;D
-
you get to brag when it's big! :D
-
beer,ralph,hotrod,brad or marc, on the website eddiemarine.com can the motor that is on the opening page be motified to work in jets or are they ready to go as is or what is needed hmmmmmmmm, thanks from the lazy unknowing person to the engines options thanks
-
beer,ralph,hotrod,brad or marc, on the website eddiemarine.com can the motor that is on the opening page be motified to work in jets or are they ready to go as is or what is needed hmmmmmmmm, thanks from the lazy unknowing person to the engines options thanks
Yes it can . There is a ton of work to do though and as you can see the exhaust alone is $2100.
-beerjet-
-
Yes it can . There is a ton of work to do though and as you can see the exhaust alone is $2100.
-beerjet-
Her exhaust would work great but for some reason I think her intake would work alot better!
-
marc, i want to buy it for the hawaiian (you know the one jim wanted to back door me on) it has thru transom covers on it now, let me know. thanks
-
That price is only for the exhaust!!! Not the engine.
marc, i want to buy it for the hawaiian (you know the one jim wanted to back door me on) it has thru transom covers on it now, let me know. thanks
-
glass it up and put a outboard on it. just ask warlock ;D :o