SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Tikotiko on August 12, 2020, 07:06:25 AM
-
Boat ran great. Has a slight hesitation around around 4600 4700 rpm. Im hoping its a rev limiter that im not aware of or the secondaries but i feel confident that it will perform well on the river. Im still going to get an MSD unit for piece of mind although i didn't notice anything with the Ebay HEI. Thank you to everyone thats given me advice. Definitely some fine tuning but it idled well and responded well so im happy. Clocked at 48 mph at 4700 rpm but i let off and cruised easily at 4500 rpm around 45mph.
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Excellent! Great job and have fun.

Sent from my iPhone using SoCal Jet Boats
-
Awesome! keep at it, it will get sorted out. Be careful at Perris, the speed limit is 35mph on the lake, dont know how seriously they patrol it though
-
Awesome news! Enjoy!


Sent from my LM-Q730 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Awesome! keep at it, it will get sorted out. Be careful at Perris, the speed limit is 35mph on the lake, dont know how seriously they patrol it though
I live about 10 minutes from the lake. Its been the only place ive taken the boat too since i bought it. But now.... we're river ready.
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Awesome news! Enjoy!

Sent from my LM-Q730 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Thank you. Im very excited
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Thank you. Im very excited
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Hell ya brother. We all get that excitement. We are happy for you. Now go tear it up
Sent from my LM-Q730 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
You going to the next event?
Sent from my LM-V405 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
You going to the next event?
Sent from my LM-V405 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Well let me see when and where it is. That would be awesome
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Is the carburetor vacuum secondary or mechanical?
Sent from my iPhone using SoCal Jet Boats
-
Is the carburetor vacuum secondary or mechanical?
Sent from my iPhone using SoCal Jet Boats
Vacuum
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
You going to the next event?
Sent from my LM-V405 using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
The one hot summer event is looking pretty damn possible. Working on something now
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Vacuum
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Sounds like the hesitation is caused by the secondaries trying to open. I had a similar issue on my prop cruiser boat, it would stumble badly and not accelerate past a certain rpm if you were at full throttle. You could back off a little and it would eventually come up on plane. I added a little bit stiffer secondary spring so that they opened later and the problem went away completely.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Had a stumble on my old boat’s 750 holley vac. Adding a quick change kit for the spring and messing with the variety pack of springs (settled on the 2nd lightest one) along with upping the squirters 2 sizes pretty much cured my problem. Maybe that could help ur situation?
Sent from my iPhone using SoCal Jet Boats
-
I also messed around with the power valve. There are a few old posts with some good responses and suggestions for the vacuum Holley carbs on a jet boat. I was satisfied with the results I got from just a few changes after I rebuilt the carb.
-
I also messed around with the power valve. There are a few old posts with some good responses and suggestions for the vacuum Holley carbs on a jet boat. I was satisfied with the results I got from just a few changes after I rebuilt the carb.
Great info thanks
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Sounds like the hesitation is caused by the secondaries trying to open. I had a similar issue on my prop cruiser boat, it would stumble badly and not accelerate past a certain rpm if you were at full throttle. You could back off a little and it would eventually come up on plane. I added a little bit stiffer secondary spring so that they opened later and the problem went away completely.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Thanks for the tip. Thursday is spring testing day
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
How did it go?
Sent from my iPhone using SoCal Jet Boats
-
How did it go?
Sent from my iPhone using SoCal Jet Boats
Time has not been on my side. I will be getting it out sometime this week after work now that i got all of these other things done. Lots of stuff going on but i killed most of it this weekend. Since i was welding I managed to make 2 pretty sweet removable flag poles. One for each corner of the rear. Unfortunately i didnt get to use them
Sent from my SM-G975U using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)