SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: smb123 on December 21, 2014, 03:38:07 PM

Title: fittings help
Post by: smb123 on December 21, 2014, 03:38:07 PM

Hi everyone I'm in need of some help. My girlfriends dad is setting up a tunnel ram for his bbc for next season and where wanting to run hardlines similar to the ones seen on The Blower Shops set up the only problem is that we cant find the fittings to finish it off In red. I was wondering if anyone knew of where to get them we need a 6AN T fitting with a gauge port, a Female strait fitting Female on both sides. Thanks in advanced everyone, I've googled it as well as tried summit and jegs and nothing.

Sean

Title: Re: fittings help
Post by: Roadrunner on December 21, 2014, 03:58:21 PM

I don't know what area you are in. Maybe VF has it? They have had every fitting I have ever needed. Couldn't hurt to give them a try. Hope this helps.


Sent from my iPhone using SoCal Jet Boats

Title: Re: fittings help
Post by: GT Jets on December 21, 2014, 03:59:24 PM

http://www.anplumbing.com/Adapters/Aluminum-14.html

Sent from my SM-G900V using SoCal Jet Boats mobile app

Title: Re: fittings help
Post by: smb123 on December 23, 2014, 11:06:47 AM

Thanks for the replies, I still wasn't able to find the fittings we were looking for but I think we're going to go a little different route and just use AN tube nuts and tap a T fitting for the gauge.  Thanks again guys