SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: norwegen jet on April 01, 2016, 01:50:57 AM

Title: ford 460 distributor help
Post by: norwegen jet on April 01, 2016, 01:50:57 AM

I have  youst purchased a new distributor to my ford 460.and i dont get a   wiring diagram. :banghead:
This have tree cords.
Red
red \ yellow
green \ white

Title: Re: ford 460 distributor help
Post by: crewchief22 on April 01, 2016, 06:12:19 AM

I've looked at a couple schematics for popular aftermarket distributors and haven't found one with the colors you have.  What brand is the distributor you have?

Title: Re: ford 460 distributor help
Post by: norwegen jet on April 01, 2016, 06:44:37 AM

this one :)
 http://ecx.images-amazon.com/images/I/4127MGlK0HL.jpg (http://ecx.images-amazon.com/images/I/4127MGlK0HL.jpg)

Title: Re: ford 460 distributor help
Post by: norwegen jet on April 01, 2016, 07:31:27 AM

😊


Sent from my iPhone using SoCal Jet Boats

Title: Re: ford 460 distributor help
Post by: Squirrel Master on April 01, 2016, 02:29:05 PM

I don't know if I'm right but I believe the two reds are going to go to the coil and the green is to the tachometer


Sent from my iPhone using SoCal Jet Boats

Title: Re: ford 460 distributor help
Post by: ron.h on April 07, 2016, 02:42:32 PM

Is it an optic eye my Mallory is a three wire the red wire goes to the positive before the ballast resistor in the two striped wires go to the coil the red White would go to positive and the green White would go to negative