SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: bkplesh on September 11, 2013, 06:26:07 PM

Title: Fuel gauge ohm
Post by: bkplesh on September 11, 2013, 06:26:07 PM

I got a beede fuel gauage #ce 946525....5-14-7 made... What sender do I need? Two or three wire?

Title: Re: Fuel gauge ohm
Post by: Chad krieger on September 11, 2013, 06:38:16 PM

U need to find out what om the gauge is then u can buy the sending unit. Goggle the gauge that u have and they can tell u what sending unit u need



Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Fuel gauge ohm
Post by: bkplesh on September 11, 2013, 06:43:30 PM

Tried that first...lost the paper work on the gauge. Thank though

Title: Re: Fuel gauge ohm
Post by: Chad krieger on September 11, 2013, 09:06:43 PM

Google the part bro they will tell u.


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Fuel gauge ohm
Post by: ka0tyk on September 11, 2013, 09:11:05 PM

you can always contact them but it seems they follow the same standards as everyone else... 240-33 ohm.

http://www.beede.com/SMF/index.php?topic=10.msg10#msg10 (http://www.beede.com/SMF/index.php?topic=10.msg10#msg10)

Quote from: beede support

2.  ,Q:  ,My fuel gauge reads backwards, does not go all the way to E or F

A:  ,More than likely a gauge/sender compatibility issue.  ,Unless specified you have a 240-33 ohm fuel gauge, ensure the sender is also a 240-33 ohm sender.