SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: eliminatorbuild on July 11, 2020, 01:40:02 PM
-
I just finished rerouting my fuel lines to the front of the motor. My question is. Will there be a problem with the lines so close to the distributor and coil? It’s a BBF.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
What type of distributor
Sent from my iPhone using SoCal Jet Boats
-
That should be fine. Mines more precarious than that.
Sent from my iPhone using SoCal Jet Boats
-
That should be fine. Mines more precarious than that.
Sent from my iPhone using SoCal Jet Boats
It’s a MSD with a soft touch rev control. Part NO. 8728. If that helps.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
As long as there are no points.
Sent from my iPhone using SoCal Jet Boats
-
As long as there are no points.
Sent from my iPhone using SoCal Jet Boats
[/here’s a pic with the distributor.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-

Sent from my iPhone using SoCal Jet Boats