SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: SomeThingWilder on March 07, 2016, 06:11:51 PM
-
So is it true if u have autometer guages you need autometer sending units and so on and so forth for all other guages out there on the market?
-
Not true! As long as the sending unit is in the same ohm range for the sweep of the gauge it will work like a champ... My last sending units I got for my auto meter gauges I got from Napa
Sent from my iPhone using SoCal Jet Boats
-
Not true! As long as the sending unit is in the same ohm range for the sweep of the gauge it will work like a champ... My last sending units I got for my auto meter gauges I got from Napa
Sent from my iPhone using SoCal Jet Boats
I got new hardin marine guages, I have autometer water temp and oil pressure senders, now both my guages are not reading . So maybe they r not in the same ohm range?
-
That would be my guess yes sir... You could contact the manufacture of the gauge and maybe ask them the ohm's?
Sent from my iPhone using SoCal Jet Boats
-
I got new hardin marine guages, I have autometer water temp and oil pressure senders, now both my guages are not reading . So maybe they r not in the same ohm range?
Wrong senders. The correct senders are cheap-ish and available from any of the online retailers that sell Hardin gauges.
http://www.hardin-marine.com/p-210-oil-pressure-sender-0-80psi.aspx
http://www.hardin-marine.com/p-217-oil-water-temperature-sender.aspx
Sent from my iPhone using SoCal Jet Boats