SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: electrowoman on July 29, 2008, 06:13:01 PM

Title: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: electrowoman on July 29, 2008, 06:13:01 PM

I have a set of long bolt manifolds on the way.  Could anyone tell me where to get snail gaskets for them?   Do you have a gasket number?

If not what type material should I get to make them?

Thank you!

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: Luckie Stiff on July 29, 2008, 06:19:50 PM

If you're talking about manifold gaskets, any auto parts store will have them, try and get the kind that DON'T have the metal backing on one side, the ones you want are here http://www.jegs.com/i/JEGS/555/210355/10002/-1/937111%7C10259 (http://www.jegs.com/i/JEGS/555/210355/10002/-1/937111%7C10259).  Did you ever sell your upswept manifolds?

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: electrowoman on July 29, 2008, 06:26:04 PM

I'm looking for the gaskets between the manifold and snails.  I still have the upswept too.

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: GAWnCA on July 29, 2008, 06:28:28 PM

Quote from: electrowoman on July 29, 2008, 06:26:04 PM

I'm looking for the gaskets between the manifold and snails.  I still have the upswept too.

Check with Tom of JBP or cpperformance.com or maybe Hardin Marine.

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: Luckie Stiff on July 30, 2008, 05:58:59 AM

Quote from: electrowoman on July 29, 2008, 06:26:04 PM

I still have the upswept too.

Refresh my memory, why was it you couldn't/didn't run those? Are they for sale?

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: electrowoman on July 30, 2008, 08:26:10 AM

When I put on the roller rockers and a stud girdle it required tall valve covers.  The upward manifolds
hit them.  I wish I could run them as they have a much nicer tone than logs.

I have them on my spare engine but I should probably sell them since I had to move my exhaust exit through the hull.  I would need longer hose for them to work now.

Make me an offer I can't refuse and they're yours.  :)

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: Luckie Stiff on July 30, 2008, 08:55:48 AM

I'll start with the standard So Cal offer, $50. Your turn ;)

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: electrowoman on July 30, 2008, 09:25:29 AM

 ;D  $400 delivered back at cha

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: COORS HEAVY on July 30, 2008, 09:33:13 AM

GLENWOOD MARINE SHOULD HAVE THEM ON THE BOTTOM RIGHT OF THE PAGE.

http://www.glenwoodmarine.net/Catalog/GASKETS.pdf

Title: Re: Harman marine Ford 460 long bolt log manifold "gaskets"
Post by: electrowoman on July 30, 2008, 01:03:41 PM

Thank you, I have 2 sets on the way.