SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: coors909 on July 19, 2015, 08:42:07 PM

Title: Headers
Post by: coors909 on July 19, 2015, 08:42:07 PM

What is the correct way to hook water up to through the transom headers? 


Sent from my iPhone using SoCal Jet Boats

Title: Re: Headers
Post by: aquaholic72 on July 20, 2015, 12:04:12 AM

Look thru past posts... gt jets has covered this subject very well..

Sent from my MB860 using SoCal Jet Boats mobile app

Title: Re: Headers
Post by: coors909 on July 20, 2015, 04:33:11 PM

Ok thank you


Sent from my iPhone using SoCal Jet Boats

Title: Re: Headers
Post by: coors909 on July 20, 2015, 09:01:30 PM

Ok so I looked through the treads for it but couldn't find anything


Sent from my iPhone using SoCal Jet Boats

Title: Re: Headers
Post by: RiverRat474 on July 21, 2015, 03:51:43 AM

http://www.bassettracing.com/ will have a little more info under FAQ tab good luck

Title: Re: Headers
Post by: RiverRat474 on July 21, 2015, 04:05:21 AM

Oops first pic was for over transom  headers

Title: Re: Headers
Post by: coors909 on July 21, 2015, 10:56:13 AM

So if I ran bought headers that didn't go over the top I would still hook them up like logs?


Sent from my iPhone using SoCal Jet Boats

Title: Re: Headers
Post by: mash on it on July 21, 2015, 10:59:46 AM

Quote from: coors909 on July 21, 2015, 10:56:13 AM

So if I ran bought headers that didn't go over the top I would still hook them up like logs?


Sent from my iPhone using SoCal Jet Boats

Water jacketed headers or injected headers?

Dan'l

Title: Re: Headers
Post by: coors909 on July 21, 2015, 11:06:48 AM

I think there injected


Sent from my iPhone using SoCal Jet Boats

Title: Re: Headers
Post by: coors909 on July 21, 2015, 11:33:14 AM

I didn't buy these but was wondering


Sent from my iPhone using SoCal Jet Boats

Title: Re: Headers
Post by: mash on it on July 21, 2015, 11:42:54 AM

Quote from: coors909 on July 21, 2015, 11:33:14 AM

I didn't buy these but was wondering


Sent from my iPhone using SoCal Jet Boats

Hooked up like traditional Bassetts, with the over board dump lines going to the fitting on the collectors to keep the exhaust hose cooler.
Still must have a bassett style valve for the injection.

Dan'l

Title: Re: Headers
Post by: RiverRat474 on July 21, 2015, 11:43:26 AM

Water injected the good old ebay headers, I've also been wondering about their quality and how long they will actual last.

Title: Re: Headers
Post by: jyeager on July 21, 2015, 12:45:22 PM

They last. I tested them for over a year for dna motoring. Just keep them clean


Sent from McIntyre park

Title: Re: Headers
Post by: coors909 on July 21, 2015, 08:46:20 PM

When you have the overload dump lines hooked do you need a valve to a just the water coming out of the headers?


Sent from my iPhone using SoCal Jet Boats