SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: jet fever on September 22, 2013, 01:24:39 AM
-
Anybody know which Holley rebuild kit # will work for a 3310 NO DASH Carb.
-
I used a Holley TricKit 37-754
RoB~SoCalJetBoats~
-
37-119 also comes up on Holleys website
RoB~SoCalJetBoats~
-
:thumbup: Thanx.
I saw the 37-119 on the website when I Googled searched it (Seems like alot of people ask the same question about it in general) but theres alot of 3310 dash whatevers and alot of misinformation on that carb on other forums
Theres a million 3310 Dash 2- to however many its up to which are 750cfm but this is the No Dash (Mine also includes the GM part number) Same as a Dash one (3310-1) 780cfm
so I wanted to see if anyone had an answer that had actually bought one and used one to steer me in the right direction
again Thank You
-
:thumbup: Thanx.
I saw the 37-119 on the website when I Googled searched it (Seems like alot of people ask the same question about it in general) but theres alot of 3310 dash whatevers and alot of misinformation on that carb on other forums
Theres a million 3310 Dash 2- to however many its up to which are 750cfm but this is the No Dash (Mine also includes the GM part number) Same as a Dash one (3310-1) 780cfm
so I wanted to see if anyone had an answer that had actually bought one and used one to steer me in the right direction
again Thank You
Like I said I used the 37-754 and had no problems.
RoB~SoCalJetBoats~