SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Steveo909 on March 07, 2017, 12:56:35 PM
-
Today I was told with the build I am doing on my 460 I will have to step up from a 750 to an 850. He recommended the Holley 4781c and can get me a good deal on it (cheaper than summit anyway). However my boat is wired for electric choke and these are manual. Do I just cap off the wires? Also my engine is under a hatch and these are not marine carbs. Is that a big deal? Auto engines are technically under a hatch also......
-
Is the engine covered?
I don't use a choke at all.
Just cut the wires back at the source, it's likely on the positive terminal on he ignition coil and a ground.
GT
Sent from my SM-G900V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Is the engine covered?
I don't use a choke at all.
Just cut the wires back at the source, it's likely on the positive terminal on he ignition coil and a ground.
GT
Sent from my SM-G900V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Yes it is covered.
-
Yes it is covered.
Marine or nothing.
JMHO
GT
Sent from my SM-G900V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Have one for sale on here used one season pulled off when sold the boat
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
-
Have one for sale on here used one season pulled off when sold the boat
Sent from my SM-G935V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
I got one. Thanks for the offer.
Sent from my iPhone using SoCal Jet Boats