SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: king295 on April 25, 2017, 09:50:03 PM

Title: Holley Throttle Bracket Input Needed
Post by: king295 on April 25, 2017, 09:50:03 PM

Looking to find what throttle cable bracket to get for my push style pedal / cable setup. Going from a stock BBC intake and Edelbrock carb to a Edelbrock Victor Jr. with a Holley 850. Attached are pics of the existing bracket which is clearly not tall enough once I attach the linkage to the top push mounting position, let alone with a 2" carb spacer. Looking for the sano setup, so what's the secret sauce?  BTW that Dr. Earth spray is the shit for white flies, lol.


Sent from my iPhone using Tapatalk

Title: Re: Holley Throttle Bracket Input Needed
Post by: SpecialTG3 on April 25, 2017, 10:09:26 PM

This is the bracket I run on my Holley. It bolts with the carb and is always in alignment.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Holley Throttle Bracket Input Needed
Post by: king295 on April 26, 2017, 10:05:45 AM

Quote from: SpecialTG3 on April 25, 2017, 10:09:26 PM

This is the bracket I run on my Holley. It bolts with the carb and is always in alignment.


Sent from my iPhone using SoCal Jet Boats

Do you have a pic of it on your boat or anyone else for that matter? Looking to order today. Thanks in advance.

Title: Re: Holley Throttle Bracket Input Needed
Post by: SpecialTG3 on April 26, 2017, 11:34:20 AM

Quote from: king295 on April 26, 2017, 10:05:45 AM

Do you have a pic of it on your boat or anyone else for that matter? Looking to order today. Thanks in advance.

I didn't have a clear picture of it off hand. I found this on the Internet.
The picture of the bracket is set up as a pull, just swap each side out and then it a push style. Hope this helps.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Holley Throttle Bracket Input Needed
Post by: 77_liberty on April 26, 2017, 11:39:37 AM

I've got one like this idk where your located but I'm in Menifee.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Holley Throttle Bracket Input Needed
Post by: king295 on April 26, 2017, 01:58:27 PM

Quote from: 77_liberty on April 26, 2017, 11:39:37 AM

I've got one like this idk where your located but I'm in Menifee.


Sent from my iPhone using SoCal Jet Boats

Thanks for the offer but I ended up ordering the one posted above by Special TG3 and ordered up this one from CP Performance with the cable installation kit. Whichever one works best will be kept the other will be returned.

http://www.cpperformance.com/p-341-stainless-steel-throttle-cable-bracket-for-holley-quick-fuel-carburetors.aspx

Thanks for the helps fellas, getting closer to finally getting my float on the water.

Title: Re: Holley Throttle Bracket Input Needed
Post by: 69SANGERFLAT on April 27, 2017, 12:39:45 AM

I've always run the one from cp, quality little part for the price


Sent from my iPhone using SoCal Jet Boats