SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: coors909 on July 18, 2016, 09:38:47 PM

Title: Hooking up water lines
Post by: coors909 on July 18, 2016, 09:38:47 PM

I have a question you guys have helped me with it once before. I will have indmars center rise exhaust. BBC. If you guys could please explain how I run the water lines the correct way with pictures please?


Sent from somewhere in Cali

Title: Re: Hooking up water lines
Post by: GT Jets on July 19, 2016, 12:18:58 AM

From the pump to a gate valve,  to a tee, one hose to each manifold bottom,  from the outlet of the manifold to the front of the motor, from the thermostat housing twice, one to each riser......

To set up the valve,  idle it in the water with the valve wide open,  then slowly start to close the valve until the temperature gets to about 150°F. Take it out and beat it like it owes you money.

GT

Title: Re: Hooking up water lines
Post by: coors909 on July 19, 2016, 09:05:57 AM

Thank you


Sent from somewhere in Cali