SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: el mojado on June 01, 2015, 06:50:45 AM
-
Cruising at 4000 rpm at Silverwood. Then with no warning, a loud KERPLUNK! Engine wouldn't turn over. Put a long screwdriver on the drive line to turn it but it would barely budge. I can hear parts rattling inside when i did that. Oil pressure was about 60 psi. I had just glanced at gauge before the KABOOM. Ranger towed me in. Much thanks to him! After I got the boat on the trailer he came back and to help me go to thr beach where all our beach crap was at. Fun day... I'll keep you posted on what I find.
-
All this bad crap has got me gun shy. I might just leave it on the trailer.
Sent from my iPhone using SoCal Jet Boats
-
All this bad crap has got me gun shy. I might just leave it on the trailer.
Sent from my iPhone using SoCal Jet Boats
#trailerqueen
"RTCP"
-
All this bad crap has got me gun shy. I might just leave it on the trailer.
Sent from my iPhone using SoCal Jet Boats
Lies, run that pile. 😜😜😜
Sent from McIntyer park
-
Lies, run that pile. 😜😜😜
Sent from McIntyer park
X2 havnt heard of too many bostick motors coming apart
"RTCP"
-
Just wondering was this on Sunday?
Sent from my iPhone using SoCal Jet Boats
-
Yes it was
-
I seen you out there ...... What a bummer man!
Sent from my iPhone using SoCal Jet Boats
-
Total bummer. But man we were having a great time. The wifey had such a great attitude about it. But i was on fire inside! Lol. But, we were safe. Nothing catastrophic. we'll be back on the water soon.
-
Forsure!
Sent from my iPhone using SoCal Jet Boats
-
That sucks man. It will come back faster, stronger....
Sent from my iPhone using SoCal Jet Boats
-
That sucks man. It will come back faster, stronger....
Sent from my iPhone using SoCal Jet Boats
I'm saying the same thing
Sent from my iPhone using SoCal Jet Boats
-
Update.... pulled carb and found chunks and a piece of a piston ring. Ok. Not good. Pulled intake and exhaust. Found more chunks. Looked down one intake port and found huge chunks of piston stuck between valve and seat. Then i found what i think caused the damage. A piece of one half of a valve retainer sitting next to a valve spring. Stuck my finger in number 8 exhaust port. Valve head is gone. And I'm sure thats the piston that is all over the intake ports. Valve kissed the piston. Any reason why retainer failed? How bad can the rest of the engine be damaged? Engine failed immediately. There was no warning sounds. Just a KABOOM and then shut off immediately.
-
sucks man. same thing happen to me but didn't destroy the head just 1 valve broke. no boom just shut off.