SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Ckaz21 on March 08, 2015, 08:18:20 PM
-
454. Mild build-049 heads 278 xtreme marine cam. 10.5 compression, New 850DP Holley as of last July. Toward the end of the season I started noticing the idle getting worse and worse, didn't look into it cause I didn't want to bother at the time.
Took it out today and it kept dying after I would slowly left off the gas after cruising. Other thing it does is when it idles it does so sporadically, every time I start it, it will idle at a different rpm and sound different. If I give it gas real quick it will hesitate and cut out.
I'm thinking its a vacuum leak..any other ideas?
Thanks
-
Vacuum leak is a good place to start looking. What distributor do you have? Inspect it to make sure the advance mechanism isn't binding up.
-
MSD Streetfire HEI. I know its not the best but the weight don't seem to bind at all every time I test them.
-
Vacuum leak is a good place to start looking. What distributor do you have? Inspect it to make sure the advance mechanism isn't binding up.
X 2 👍👍👍👍
Sent from my iPhone using SoCalJetBoats mobile app
-
Spray and even sure your air bleeds are clear
-
X2 make sure air bleeds are clean.. alil chunk of poop can cause havock
Sent from my MB860 using SoCal Jet Boats mobile app
-
If I give it gas real quick it will hesitate and cut out.
I'm thinking its a vacuum leak..any other ideas?
Thanks
Check the accelerator pumps.
Sent from my iPhone using SoCalJetBoats
-
What exactly do you suggest checking on the pumps?
-
Make sure they're both squirting properly.. If not, that would definitely cause your hesitation on acceleration
Sent from my iPhone using SoCalJetBoats