Null


stc315

  • Karma: +3/-0
Electric fuel tank valve
« on: June 28, 2012, 01:07:30 PM »
Anyway to test it to see if it's working without have to run engine? I'm seriously thinking of just buying some ball valves at Lowes and plumbing them in, but it's such a hassle to climb back and switch them (not to mention it's not good to run the motor out of gas).
Thanks,
Sam
  • Boat #1: 1987 Baker Tunnel Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Too much horsepower is almost enough!!!"

uncleBOBBY

  • Karma: +2/-0
Re: Electric fuel tank valve
« Reply #1 on: June 28, 2012, 02:10:34 PM »
i have a machanical valve, you can get them from rex or dana, easy to install and uscg approved. also i have 1 fuel guage and two sending units and i just have a toggle switch to go back and forth between sending units. as soon as it hits empty, i hit the switch and turn the valve and away i go. without running the tank completely empty.
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

AQUAHOLIC

  • Karma: +7/-0
Re: Electric fuel tank valve
« Reply #2 on: June 28, 2012, 03:34:11 PM »
screw that. go down to autozone or any parts store and get an electric fuel switch from and old chevy or ford truck.  they work great and i never once had a problem with mine on my day cruiser.

if your current one works you should be able to hear it click when you flip the switch to change tanks

this is what i used

http://www.autozone.com/autozone/accessories/Duralast-Universal-3-port-fuel-selector-valve-used-with-SW48-toggle-switch/_/N-26nl?itemIdentifier=971864_0_0_

hope that helps

Duralast/Universal 3 port fuel selector valve used with SW48 toggle switch
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
When  you turn your boat on... does it return the favor?

BIG JOHNSON

  • Karma: +1/-0
Re: Electric fuel tank valve
« Reply #3 on: June 28, 2012, 06:39:38 PM »
No complaints with my setup from Hose Man. Let em both drain evenly and turn off the empty one if you run low.

The teflon I started with leaked so I used motoseal non hardening thread seal. Just keep it off the first couple threads and bada-bing.

Sent from my ADR6400L using Tapatalk 2
  • Boat #1: 1994 Ultra LX 21"
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party

stc315

  • Karma: +3/-0
Re: Electric fuel tank valve
« Reply #4 on: June 28, 2012, 08:07:57 PM »
That's what I did on my last boat. I have the ball valves on my work bench. I would just need hose fittings and clamps.

Sent from my DROID BIONIC using Tapatalk 2
  • Boat #1: 1987 Baker Tunnel Jet
  • Like
    Dislike
    Love
    HaHa
    Angry
    Surprise
    Sad
    Party
"Too much horsepower is almost enough!!!"

 


Null

SMFPacks CMS 1.0.3 © 2026