SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: msrn702 on December 10, 2011, 11:05:08 AM

Title: intake manifold gasket help
Post by: msrn702 on December 10, 2011, 11:05:08 AM

I'm replacing the intake manifold gasket on a 460 bbf with a tunnel ram and the gasket doesn't seem to fit correctly. The bottom of the gasket sticks out in the port. The heads are 460 and the gasket set us for a 460. Is this normal/ok? Thanks.

Title: Re: intake manifold gasket help
Post by: GT Jets on December 10, 2011, 11:34:33 AM

I think you may have the 2 1/4" gaskets, you may need the 2 5/8" port size gaskets... ;)

http://www.summitracing.com/parts/FEL-1231/ (http://www.summitracing.com/parts/FEL-1231/)

GT

Title: Re: intake manifold gasket help
Post by: msrn702 on December 10, 2011, 11:47:32 AM

I think thats exactly what I need the gt jets!