SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: 78centurian on January 21, 2010, 09:35:08 PM

Title: is it possible
Post by: 78centurian on January 21, 2010, 09:35:08 PM

to change a vac sec carb to man sec?

Title: Re: is it possible
Post by: IRRebel on January 21, 2010, 09:39:30 PM

Holley? Can if a 4150, but not a 4160. Dunno with as cheap as carbs are out there that it's worth the hassle tho.

Ray

Title: Re: is it possible
Post by: mopartec on February 04, 2010, 01:09:34 PM

the trick years ago was to put a screw and nut to the linkage to force the secondaries open. youd end up with a flat spot because there is no accelorator pump for the secondaries. find a good use holley carb.

Title: Re: is it possible
Post by: Luckie Stiff on February 04, 2010, 02:49:41 PM

Quote from: 78centurian on January 21, 2010, 09:35:08 PM

to change a vac sec carb to man sec?

Yes, Bigg's Carbs does it all the time, they sell a bitchin' kit to do just what you're after...

Give them a call, I know a guy in Nor Cal that had his done, and he loves it.

http://www.bigsperformance.com/index.htm (http://www.bigsperformance.com/index.htm)