SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Marcsrollin on May 06, 2009, 09:28:40 AM

Title: Just Got Back From Schneider!!!!!
Post by: Marcsrollin on May 06, 2009, 09:28:40 AM

And had my new cam made! ;D ;D ;D Should make some good power , Mechanical roller!




[attachimg=#]

Title: Re: Just Got Back From Schneider!!!!!
Post by: Brad @ SCJB on May 06, 2009, 09:45:52 AM

sweeeeet

Title: Re: Just Got Back From Schneider!!!!!
Post by: Marcsrollin on May 06, 2009, 09:48:12 AM

And here are the heads that are going with it!!


[attachimg=#]
[attachimg=#]
[attachimg=#]
[attachimg=#]


Should be a real go getter!! ;D

Title: Re: Just Got Back From Schneider!!!!!
Post by: CHROMEY on May 06, 2009, 11:25:33 AM

I WANT A RIDE NOW!!

Title: Re: Just Got Back From Schneider!!!!!
Post by: pw_Tony on May 06, 2009, 12:07:49 PM

So technically that really is considered a "3/4" race cam  ;D

Title: Re: Just Got Back From Schneider!!!!!
Post by: HDriderTH on May 06, 2009, 01:12:48 PM

Better hurry son if your gonna put me on the trailer next month.. ;)

Title: Re: Just Got Back From Schneider!!!!!
Post by: ryanbrindle on May 06, 2009, 01:15:46 PM

Quote from: pw_Tony on May 06, 2009, 12:07:49 PM

So technically that really is considered a "3/4" race cam  ;D

Im not trying to be an ass or anything but what makes it a 3/4 race cam and what would need to be different to be a full race cam?

Title: Re: Just Got Back From Schneider!!!!!
Post by: pw_Tony on May 06, 2009, 01:31:03 PM

Quote from: ryanbrindle on May 06, 2009, 01:15:46 PM

Im not trying to be an ass or anything but what makes it a 3/4 race cam and what would need to be different to be a full race cam?

It's a play on words. The cam's got right about 3/4 of an inch of lift

Title: Re: Just Got Back From Schneider!!!!!
Post by: ryanbrindle on May 06, 2009, 01:32:58 PM

Quote from: pw_Tony on May 06, 2009, 01:31:03 PM

It's a play on words. The cam's got right about 3/4 of an inch of lift

OOOOHHH!  I gotcha!