SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: GreatLakes Jet on July 12, 2010, 09:57:56 PM
-
is there a way to check and make sure the logs don't leak got them off the boat ie pressure w/air or jist water
-
I ran a fitting that would hook up to my garden hose to the inlet and blocked off the outlet with a piece of tubing and a bolt as a stop with a hose clamp . I then turned on the hose . and waited....
-
thanks 79charger
-
Just a FWIW, if water can get out so can air....... :thumbup:
15 PSI air pressure should hold virtually forever :thumbup:
GT