SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Dredder on October 11, 2013, 10:17:18 AM

Title: Looking for a shop recommendation
Post by: Dredder on October 11, 2013, 10:17:18 AM

Im looking for a shop recommendation in the San Diego area. Im looking to do a new card and tune on my 91 21' ultra 390 stoker I/O. I bought the boat and the owner said the motor has never been broken in and only had a couple hrs on it. I have only had it out once and put 5hrs on it. I am currently working as a contractor in Afghanistan so I have not been able to spend anytime on it. Basically im looking to upgrade the carb and have it tuned. Currently at high idle it dies out and it is not getting the desired RPM what I thought it should have. Again Im overseas and was only able to spend one week with it the last time I was home. Looking to get it running so it tits when I get home for next river season.  Thanks

Title: Re: Looking for a shop recommendation
Post by: santeerob619 on October 11, 2013, 11:00:25 AM

Rick Walker. Best carb guy in SD. Tell him the specs of your motor and he will give you a bolt on carb with minimal tuning, if any.

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

Title: Re: Looking for a shop recommendation
Post by: Dredder on October 11, 2013, 11:28:57 AM

Gracias

Title: Re: Looking for a shop recommendation
Post by: Sicaz66 on November 06, 2013, 08:19:25 AM

Quote from: santeerob619 on October 11, 2013, 11:00:25 AM

Rick Walker. Best carb guy in SD. Tell him the specs of your motor and he will give you a bolt on carb with minimal tuning, if any.

Sent from my DROID RAZR HD using SoCalJetBoats mobile app

Another plug to Rick( and Izzy)heres his #. 619-544-8213. It's a pager. He's old school like that.

Title: Re: Looking for a shop recommendation
Post by: smoothaseggs on February 23, 2014, 10:05:49 PM

File this one away

Sent from my DROID RAZR using SoCal Jet Boats mobile app