SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: mobmentality on August 11, 2011, 07:39:36 PM
-
I have 2 sets pf motor mounts .... anyone know what motors they are for?? I don't know how to tell ... and are all the pieces there? ?? All info is helpful about them.. thanks in advance ...
Sent from my DROIDX using Tapatalk
-
bottom 1 looks kinda like Ford?????
-
The parts in the lower pic are for a Chevy. The bellhousing will fit either a BBC or SBC as they use the same pattern. The two front mounts are for BBC only. The item on the left is for a "rail mount" set up. The two items on the right are Glenwood mounts for a rubber mount setup. Flip those over and you will find the Glenwood part numbers, 35306 for the bellhousing and 35206 for the front mount. How'd I do? :)
-
OK heres my guesses,
First pic, left to right, BBF rear plate, BBF front cast mount, flywheel cover (see what the bolt holes line up with), and what looks like an attempt to make a front mount for a BBF that replaces the water pump blockoff plate (not sure what that round hole is for)
Second pic, left to right, BBC front plate, BBC rear cast mount, BBC front cast mount.
-
The parts in the lower pic are for a Chevy. The bellhousing will fit either a BBC or SBC as they use the same pattern. The two front mounts are for BBC only. The item on the left is for a "rail mount" set up. The two items on the right are Glenwood mounts for a rubber mount setup. Flip those over and you will find the Glenwood part numbers, 35306 for the bellhousing and 35206 for the front mount. How'd I do? :)
better than me shows what I know,ill just slink back into my corner now
-
Thanks everyone... im a bit confused on your answers.. so do I have them all mixed up? Hahahah .. what I need is to separate them so I know what goes with what ... and I need the set for a bbc and gonna sell the other set if I can ... should. I line them up and put numbers by them and then you guys can tell me what numbers go together to make up sets ... thanks again...
Sent from my DROIDX using Tapatalk
-
Oh and what else do I need to install these etc... do I have to have a rail kit??? Or can I bolt then straight to the stringers??? Confused ......
Sent from my DROIDX using Tapatalk
-
1st pic, 2nd from left, BBF front mount. Youll need these to attach to stringers. Dosent look like you have the matching rear mount.
-
Do I have what I need to run a 454 bbc .. other then buying the mount feet I need do I have the plates I need? Thanks ...
Sent from my DROIDX using Tapatalk
-
Do I have what I need to run a 454 bbc .. other then buying the mount feet I need do I have the plates I need? Thanks ...
Sent from my DROIDX using Tapatalk
Yes
Second pic. Center one is your rear mount and the one on the right is its matching front mount. You just need the proper mounting feet for them.
-
Awesome... thanks guys.... gonna learn alot of stufff from you guys.... this site is like a bible For boats hahahah ...
Sent from my DROIDX using Tapatalk