SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: marty722 on May 03, 2009, 06:31:24 PM
-
Ok I want to swap out to a electric fuel pump. Any tips and tricks? :banghead:Do I need to remove the old fuel pump and plug up the hole or can I just plug up the inlet and outlet? Any other thinigs I need to be awhere of.
Thanks Marty
I had a carter on my old boat and never had a problem, Is this a good one to get?
-
why do you want to go electric? just some thing else to go wrong
-
I agree with Ralph. I have a 31 year old mechanical pump that was on my sons boat last week working. It was a fill in till his new one came in from Summit.
I would doubt you'll find any electic pumps that last near that long. ;)
Definately use a block off plate and pull the old pump if you do switch over. No sense wasting HP
running a pump you aren't using.
Then again, you could let the pump on and have some spare hose for the day the electric pump quits.
-
ok like I said I don't want to use an electric fuel pump anymore.... Thanks for saving me money and now I won;t get yelled at by the wife. :screwy:
-
Put your E pump inline w/ the M pump, or remove it. If you run the M pump dry, it'll ruin the pump.