SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Bonzen on June 15, 2017, 09:08:54 AM

Title: Need a high flow water fuel seperator for Holley EFI
Post by: Bonzen on June 15, 2017, 09:08:54 AM

Just installed the Holley Terminator EFI on my BBC. However Holley recommends a 75-100 micron pre-filter (after gas tank, but before the fuel pump) and there isn't a canister type water fuel separator that high flowing I can find.

I found a 21 micron Sierra unit, but that's still way restrictive according to Holley. Any ideas? Besides not running one...

(http://)

Title: Re: Need a high flow water fuel seperator for Holley EFI
Post by: RojoRick on June 27, 2017, 01:19:56 PM

So like a sock filter on factory efi cars that goes in the tank? 75-100 microns seems high.

WIX makes a spin on separator that will handle 100gph, I would imagine that would work.