I need ideas on pluming water and fuel

« **on:** April 05, 2010, 08:33:00 PM »

getting ready to plum water and fuel lines want to see what everyone is doing. thought about using this stuff called push lock. was told it cost about half the price of stainless steal and i cam get it in colors want to use yellow for everything fuel and water. any thoughts or pics of what this might look like would be great guys ... Doing -12 from tank to BG 400 -2 and -10 to reg and -6 from reg to carb ... running 2 tanks and not sure that size to use for water in and header and water out.. all help would be great guys thanks...

« **Reply #1 on:** April 05, 2010, 08:55:55 PM »

Push lock is good. You can use stainless an hose with it as well as most other hoses. eliminates the need for hose clamps and looks nice. I would run an and stainless hose for the water lines tho because of the high pressure. I did -12 for my oil lines,oil cooler and filter bypass,-10 for all the water lines,dumps, water pressure bypass ect. I used -12 from the pump to the sea strainer water line. -8 for the fuel lines. -6 for the fuel return lines and -20 for the fuel tank balance hose. -6 for the main nitrous hose.-6 for the fuel vent lines.lets just say my boat runs on the cold side and everything flows the way it should or better. I take pride in the way I rigged my boat but the cost

BoatsNHoesNKL

I need ideas on pluming water and fuel

ROMPERSTOMPER

Re: I need ideas on pluming water and fuel