SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: ka0tyk on February 15, 2011, 06:08:25 PM
-
id normally pickup a felpro for a car, but didnt know if there was a marine prefered gasket or anything like that. i figure ill need a headgasket set, headbolt set, intake manifold gasket set, and exhaust manifold gasket set (previously using silicone, figure its time to just use gaskets), and i dunno what else is needed.
fairly stock bbc.
-
One pretty good place to get bolt sets not matter what vehicle or motor, or engine, or application is Headbolts.com Good pricing also. Just MO :thumbup:
-
id normally pickup a felpro for a car, but didnt know if there was a marine prefered gasket or anything like that. i figure ill need a headgasket set, headbolt set, intake manifold gasket set, and exhaust manifold gasket set (previously using silicone, figure its time to just use gaskets), and i dunno what else is needed.
fairly stock bbc.
IMHO the cheapest and best way to go would be to order a Fel-Pro marine valve grind set. If you piece it together you will very well spend more money than just buying the kit to start with....The "marine" set has all the proper gaskets and is pretty damn complete...
Here you is O0 http://www.summitracing.com/parts/FEL-17242/ (http://www.summitracing.com/parts/FEL-17242/)
GT
-
GT, I was searching for the 455 marine set but came up short... ???
Does fel pro make a marine application? if so a link would be greatly appreciated
-Justin