SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: dewest on June 24, 2015, 08:29:09 AM
-
I just picked up a project boat. It's a 1971 Mariah with a Oldsmobile 455 and a Jacuzzi pump. The issue is I'm new to jet boats and it appears I'm missing the Bell housing/rear motor mount and whatever it is that attaches the motor to the splined shaft for the jacuzzi pump. I have been able to find the Bell housing on eBay but my ?? Is what is it that I need to to mate the 2, together. Thanks Dustin
-
Need pictures!! We'll start there.
Sent from my VK810 4G using SoCal Jet Boats mobile app
-
Getting ready for a paint job while I'm waiting on machine shop to Finnish so I can assemble the motor
-
Drive line...I got
Might have Olds 4 pt Bellhsng, I'd have to look, IDK
Dan'l
-
If mash on it does not I'm sure i do.
Sent from my iPhone using SoCalJetBoats
-
What ever you guys got to revive this neglected beast would be awesome .I live in Walla Walla,Wa so it would have to be shipped if possible
-
The bell housing is the rear mount then there is a front mount and you will need a joint with coupler. I have to see if I have the coupler. I will get pics up this afternoon. For you.
Sent from my VK810 4G using SoCal Jet Boats mobile app
-
I might have a driveline for you let me check and see I'm in Lewiston so I'm kinda close
Sent from my iPhone using SoCal Jet Boats
-
I have a bellhousing but it's for a berkeley and I don't think it would work for u unless u wanted to do a 4 point mount then this one would work for that too
Sent from my iPhone using SoCal Jet Boats
-
My boat is set up for the 4 point mount... Pardon the beauty bark replacing the stringer...lol
-
Hey vedo71 if you have anything that I can use I'm willing to drive to Lewiston