SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: ROMPERSTOMPER on February 19, 2010, 11:23:05 AM
-
I'm going to run vent hoses from my fuel tanks to a catch can-breather. I currently have those crome flip top four hole mounting fills with built in vents. I don't think they vent enough for my app. Do you guys know of a place or company that makes some billet ones that will bolt rite up. I don't want to have to do any hull-or glass work for new fills. Or do any of you guys want to trade for mine, If yours are non vented. they are in perfect shape Ill post some pics of them tonight. either way I wont need my old ones anymore so if any one is interested let me know. I'm hoping to find some crome or anodized chiny ones. Thanks.
Jimmy.
-
This may help or may not. I did not want to make any more holes in my gunnels but it looks like a factory install.
T.J.
http://www.socaljetboats.com/engine-mechanical-electrical/fuel-vents-second-design-done-!!!-pics/ (http://www.socaljetboats.com/engine-mechanical-electrical/fuel-vents-second-design-done-!!!-pics/)
-
You did a great job with those. And the install does look factory. There's very little room in that spot on my hull on the inside for a an hose end, I want to go with -8. I don't know if they would fit. How hard would it be for you to make another set if possible. Ill buy a set from you. the ones I got from hardin marine are way to long. That's why I was planning on doing a catch can with a small k&n breather. Its would also work as a over flow. Let me know either way no biggie they will both work. Is there a way to convert my fills to non vented?