oil breather???????

« **on:** May 31, 2010, 12:59:10 PM »

Problem I have is, I have a 455 olds misting or spraying oil out the oil breather. I have tried diff. breathers that are baffled. please help.

« **Reply #1 on:** May 31, 2010, 01:44:00 PM »

got same problem with my 455 interested to see what someone says about it. the boat runs great but just that little issue.

« **Reply #2 on:** May 31, 2010, 02:09:22 PM »

Are you v/c's baffled?

« **Reply #3 on:** May 31, 2010, 06:05:26 PM »

baffles and there is a foam that some shops sell just for that application.
Some folks wrap it around the outside and others stuff it inside the breathers.

-beerjet-

« **Reply #4 on:** May 31, 2010, 07:12:27 PM »

Just rap panties around the breathers...G-Strings work best

« **Reply #5 on:** May 31, 2010, 07:17:22 PM »

Who s Omars

« **Reply #6 on:** May 31, 2010, 10:33:21 PM »

Quote

Who s Omars

X2

-beerjet-

« **Reply #7 on:** June 02, 2010, 09:41:57 AM »

Yep had one of those breathers and they suck! Just go back to the og pcv valve and hook it up to your carb. Problem solved the cheapest and most efficient way. Unless you want to spent some real money on some edelbrock or morosso breathers which are 30 bucks a piece and those don't spew any oil for some reason
Good luck.

« **Reply #8 on:** June 02, 2010, 01:17:51 PM »

mine did it to idk if its an olds thing or whet i just run a pcv valve and it fixed the problem

« **Reply #9 on:** June 02, 2010, 05:11:33 PM »

Quote

Just rap panties around the breathers...G-Strings work best

Ha Ha Ha Ha !
Yes they do !!!!!

-beerjet-

« **Reply #10 on:** June 04, 2010, 09:38:40 PM »

I tried the panty shit...didnt work.
well i researched the prob. and the answers were all different. My engine does have a high volume oil pump. The engine does have restrictors. I was told to swap the high volume pump for a stock, add restrictd push rods for jetboat appl. by MONDELLOS TWISTER they have all the goods for oldsmobile.

« **Reply #11 on:** June 11, 2010, 02:59:45 AM »

Make a puke tank, use 3 in pc pipe two 3 in caps put a breather on top and a line in from the breather or breathers.

« **Reply #12 on:** June 17, 2010, 03:47:23 AM »

On my 460 Ford I put a breather line in the pan and built a puke tank, it works well takes the motor pressure down to a minimum.

1smknjoe

oil breather???????

bigmike

Re: oil breather???????

2savage4you

Re: oil breather???????

beerjet

(No subject)

enginedoctor

Re: oil breather???????

honda1

Re: oil breather???????

beerjet

(No subject)

GeneralLee

Re: oil breather???????

quick olds

Re: oil breather???????

beerjet

(No subject)

1smknjoe

Re: oil breather???????

SS-201

Re: oil breather???????

SS-201

Re: oil breather???????