so i get ready to change my oil i know the motor has to come out of the boat, buuuuut i thought that maybe i could siphon it out with this so i take the drain plug out and stuff the hose in the drain hole, in the panic to get the hose in the hol i drop the drain plug and it rolls under the pan, curse really loud. 

then i try to get the siphion going, wont go shit i got 20-50 in it and it's cold, the oil is too thick. i reach for drain plug that is now under the pan and well you know i cant get it. the magnets on the tool box but im stuck with my finger in the hole . so i stuff the hose back in the hole and go get the magnet, and this is what i came back to

so i curse some more, now i really gotta take the motor out
and clean up the mess, curse some more

well i never will have to take that motor out to change the oil again i put a drain hose on it


but hey i got the pleasue of knowing the job was done rite hope you got a laugh out of it because i am now.    ralph

hey i just like to know how long did it take to pop the motor  out just the motor and to install again not the clean up time. just want to know thanks

well i think with you doing it in a hour you should pop the motor when you need to change the oil from now on and you will probably get faster at it anyway. lol

i'm lazy that's why i went with the drain hose.

I have 50wt in mine and the oil wont even come out the hose. I have to run the motor till its warmed up and even then it takes an eternity. I hope it works out better for you .

-beerjet-

Damn that was funny, thanks!   

Have you thought about an oil cooler ?

I run 10-30 in heat racing and my presure is 70-80 & 20-50 for lake and river runs 65-70 all day, 

The thing is back in the day when I was working on cup cars we ran less than 5wt in qualifing.

Have you thought about an oil cooler ?

Yes I have .

-beerjet-