SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: The Chaz on July 31, 2007, 07:56:01 PM

Title: Oil pan attachment
Post by: The Chaz on July 31, 2007, 07:56:01 PM

What does everyone use to attach their oil pan gaskets?  I have heard a couple different things and just wanted some feedback from here.  Obviously I have a 460 pan that I am going to be attaching. ;D  But I am sure the sealant used is the same for the other engines as well.  Thanks

Title: Re: Oil pan attachment
Post by: Ralph Brunt on July 31, 2007, 08:02:45 PM

i put mine on the block with 3m spray on trim adhesive and just bolt the pan on, of course using sillycone on the seals

Title: Re: Oil pan attachment
Post by: FORKEDUP on July 31, 2007, 08:06:42 PM

same principal but i use gaska-cinch, works the same way

Title: Re: Oil pan attachment
Post by: The Chaz on July 31, 2007, 08:14:20 PM

so nothing on the pan side?  including the end seals?

Title: Re: Oil pan attachment
Post by: FORKEDUP on July 31, 2007, 08:18:28 PM

i personally don't, have not had a problem yet, knock on wood