SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: ghett0man on March 02, 2015, 03:27:00 PM

Title: Pushrod BBF 460
Post by: ghett0man on March 02, 2015, 03:27:00 PM

Totally normal right?



Sent from my iPhone using SoCal Jet Boats

Title: Re: Pushrod BBF 460
Post by: LakesOnly on March 02, 2015, 10:36:22 PM

I've seen pushrods like that a number of times, bent into that exact same shape every time, and inside an engine that's in a jet boat every time...that was over-revved somewhere along the way.

Looks like the lifter didn't pop out of its bore; go ahead and install a replacement pushrod of the exact same length, test run, and hit the water.

Title: Re: Pushrod BBF 460
Post by: kptnkhaos on March 02, 2015, 10:40:53 PM

Nice


Sent from my iPhone using SoCal Jet Boats

Title: Re: Pushrod BBF 460
Post by: Squirrel Master on March 03, 2015, 12:00:48 AM

I have a ass load of pushrods measure a good one n let me know just pay shipping 3 to 5 $ probly

Title: Re: Pushrod BBF 460
Post by: ghett0man on March 03, 2015, 07:04:10 AM

I'm thinking some water got in that cylinder. There was a little bit of milk shake in that cylinder only. All the lifters are loose and appear fine. The cam appears good too.
I'm taking the heads in to have them gone through and I'll replace the pushrods.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Pushrod BBF 460
Post by: ghett0man on March 04, 2015, 03:20:28 PM

Thnx for the offer squirrel. I had already ordered some. But I appreciate the offer.


Sent from my iPhone using SoCal Jet Boats