Post by: Steveo909 on April 26, 2017, 10:15:49 PM
The linkage for the choke is hanging up on the side of the spark arrester. (Pictured)Has anyone else had this problem?
Solutions??
Sent from my iPhone using SoCal Jet Boats
Post by: GT Jets on April 26, 2017, 11:50:02 PM
Personally I would eliminate the choke, but that's me.
GT
Sent from my SM-G900V using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: 69SANGERFLAT on April 27, 2017, 12:33:41 AM
Sent from my iPhone using SoCal Jet Boats
Post by: Steveo909 on April 27, 2017, 07:40:34 AM
This is the arrestor.
Sent from my iPhone using SoCal Jet Boats
Post by: Strok-Her on April 27, 2017, 10:36:46 AM
Strok-Her
Post by: SpectraRyan on April 27, 2017, 11:31:53 PM
Sent from my SM-G920T using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: JONNYBOY18 on April 29, 2017, 07:16:54 AM
Sent from my iPhone using SoCal Jet Boats
Post by: Steveo909 on April 29, 2017, 07:19:59 AM
I just took the choke off my brand new 750. Easy money.How did you get the butterfly off? Did you have to drill the end of the shaft?
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: SpecialTG3 on April 29, 2017, 07:58:32 AM
Just got my quick fuel marine 850 in the mail. Beautiful carburetor but a slight problem.
The linkage for the choke is hanging up on the side of the spark arrester. (Pictured)Has anyone else had this problem?
Solutions??
Sent from my iPhone using SoCal Jet Boats
Holley makes a couple of different flame arrestors. Just going by the picture you posted, it seems to be a 6" wide one. From what I read, the 6" are only rated for 600 CFMS. Holley makes a 8" wide arrestor rated for 800 CFMS. With the 8" wide arrestor you will be closer to your CFMS of the carburetor and it will give you more room for the choke linkage.
Hope this helps.
Sent from my iPhone using SoCal Jet Boats
Post by: Steveo909 on April 29, 2017, 08:01:04 AM
Holley makes a couple of different flame arrestors. Just going by the picture you posted, it seems to be a 6" wide one. From what I read, the 6" are only rated for 600 CFMS. Holley makes a 8" wide arrestor rated for 800 CFMS. With the 8" wide arrestor you will be closer to your CFMS of the carburetor and it will give you more room for the choke linkage.I see. The problem is, I don't think anything bigger than this will fit under my hatch.
Hope this helps.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: SpecialTG3 on April 29, 2017, 08:26:27 AM
I see. The problem is, I don't think anything bigger than this will fit under my hatch.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Same height, just wider.
Sent from my iPhone using SoCal Jet Boats
Post by: Steveo909 on April 29, 2017, 12:53:24 PM
Same height, just wider.The current flame arrestor fits into a small scoop built into the engine cover. I think the bigger diameter will be an issue.
Sent from my iPhone using SoCal Jet Boats
I'll just try some things when I get everything put back together.
I'll probably just remove choke all together since it seems to be the cool thing to do.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)