SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: fixxzilla on April 23, 2008, 07:17:49 PM
-
well i tryed to post some pics but my stupid dial up wont do it i m runin 9.1comp isky duel carb intake duel plenum on the heads 21/4 inches intake and ex is 1 7/8 inches ill go with the duel 500 hollys if thatl be ok if ya dont think so let me know again thank for your help
-
I assume this is from the other thread you started.
Holley doesn't make 500's, except in the 2bbl configuration, and those won't fit your manifold.
I think you meant the holley 1850,which is a vac secondary 600 cfm carb.
-
ya its me lol darn new guy ok so i go with the 600s if ya see any let me know still savin up for the cam i seen a reply in another post about herbert cams he said they do custom grinds i called comp cams but i heard they have some issues becouse of mas production im definatly a good engin guy but cams realy throw me btw i seen also i can run reg gas if i go to 10.1 compresion to me id rather go that way now to have better performance and quiker responce i have the time and ill have the money soon for new pistons the block has to be retanked and honed couse of this florida humidity if you ever move here dont leave your bare engins in the garage with out bagen :banghead: them up they get alota moisture from condensation thanks for your time guys and how do i get a pik on the side of my post like that lol