SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Tylertjeep73 on January 28, 2015, 04:54:52 PM

Title: Should I pull it !!
Post by: Tylertjeep73 on January 28, 2015, 04:54:52 PM

We'll my engine is torn down while having my heads worked on
Should I just bite the bullet and pull it out
Clean an paint the transom area install new lines
Paint the block and heads and have my headers re chromed ?
Big a$$ oil pan???????

Title: Re: Should I pull it !!
Post by: shovelhydro396 on January 28, 2015, 04:57:39 PM

You might as well go ahead and clean her up a little bit. I'm debating on tearing mine down and making a 477 stroker out of it

Title: Re: Should I pull it !!
Post by: Tylertjeep73 on January 28, 2015, 05:03:30 PM

That's my thing it's only January ... And I might as well lol

Title: Re: Should I pull it !!
Post by: hallett1974 on January 28, 2015, 05:23:53 PM

It's ture it only January so get some of the stuff you want to get done now.  Can't want to see your Hallett on the water.

Title: Re: Should I pull it !!
Post by: ka0tyk on January 28, 2015, 05:58:46 PM

i dont understand how people can have a dirty bilge. 

Title: Re: Should I pull it !!
Post by: TrollerDave on January 28, 2015, 06:02:06 PM

Quote from: ka0tyk on January 28, 2015, 05:58:46 PM

i dont understand how people can have a dirty bilge.

Paint it black and you'll never know.  :o

Title: Re: Should I pull it !!
Post by: Tylertjeep73 on January 28, 2015, 06:08:37 PM

Yea my pops and I are thinkin we might just do it if anything just to clean and paint
It shouldn't be too hard to do ??
Best I got ! On the water lol damn telephone cove is so shallow this time of year almost had to use 4x4 haha