SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Trukinbear on July 04, 2013, 12:22:54 PM
-
Hi guys, looking for the part number for the 1310 spicer u-joint flange to PTO adapter. Or does anyone know what the bolt pattern is?
-
I know, I know - all you folks probably have them fancy store-bought drivetrains. What I have is bolted together 3 flanges, 2 u-joints, and the splined drive flange - the same thing that somebody came up with that fancy center piece to replace. The store-bought ones are $175 but even if you buy the center H piece it's still only about $60 worth of parts + I'd hate to replace the whole shebang just for one slightly off flange. I sure wish Spicer stamped part numbers on these. Looking at this chart, the combinations seem endless.
Photo is before it got cleaned and the u-joints replaced - still serviceable but I'd like to replace one of the flanges that shows some damage eventually.
And yes I know these are Nepco parts numbers. http://www.drive-lines.com/neapco/1310.php (http://www.drive-lines.com/neapco/1310.php)