Post by: WhyNot76 on August 04, 2017, 08:17:35 PM
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: GT Jets on August 04, 2017, 09:30:47 PM
So I have a top mount starter, what I'm looking for is something to bolt up where a bottom mount starter would go to help keep any random oily water being flung off my flywheel onto my new carpet, curious if there's something on the market or if it's something I'll make myself.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Ford or Chevy?
Post by: WhyNot76 on August 04, 2017, 09:31:26 PM
Ford or Chevy?BBC
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: GT Jets on August 04, 2017, 09:41:13 PM
BBC
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Yeah, that's going to be tough. Borg Warner makes a plate for Mercruisers with high mount starters, it mounts under the block and the bell housing. There is a chance I have one in the stash somewhere. I'll try to check it out.
[attachimg=1]
Post by: GT Jets on August 05, 2017, 05:04:12 PM
What bell housing are you using?
GT
Post by: WhyNot76 on August 05, 2017, 08:52:27 PM
I have one, but it's not what I thought it was.... If fits a very specific bell housing for a Velvet Drive transmission.Right on, I appreciate you checking, in not sure exactly which bellhousing it is, I've stripped the paint off it before and it has no stamping or anything, whatever would have come stock with the panther/BBC combo I assume. I'm gonna dig into it a bit tomorrow and see what I can whip up for the time being. Just had the carpet all done so I'm determined to come up with something to keep it clean
What bell housing are you using?
GT
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: WhyNot76 on August 05, 2017, 09:04:48 PM
I have one, but it's not what I thought it was.... If fits a very specific bell housing for a Velvet Drive transmission.Didn't think I'd still have these pics but here it is.
What bell housing are you using?
GT
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Post by: oldseddie on August 06, 2017, 05:01:02 AM
Didn't think I'd still have these pics but here it is.I made my own for my Indmar three point bell housing from 16ga aluminium. Traced it from the bell housing and cut it out with a jigsaw. A little sanding and drilling mounting holes and it looks better than what is available and it won't rust.
Sent from my iPhone using SoCal Jet Boats mobile app (http://r.tapatalk.com/byo?rid=201)
Sent from my Nexus 9 using Tapatalk