SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: Paul on June 26, 2010, 09:46:28 AM
-
My steering has gotten really stiff on my jet boat. Is this something you can have lubed or do you just replace cable ?
-
I had the same problem. I took off the steering cable on the outside of the jet drive. Put a hose over the cable and clamped it with hole clamps. Poured Liquid Wrench in the hose and put a made a cap with a small hole in it and clamped it onto the hose. Took my air compressor and put 10 psi on it and pushed the liquid wrench into the cable. Has worked for years.....
Hope this helps. ;D
-
bac got lucky , generally when these cables stiffen up there pretty much done , simple to replace and cheap Tom
-
bac got lucky , generally when these cables stiffen up there pretty much done , simple to replace and cheap Tom
X2. Not that expensive, and this is one o dem dare extreme safety issues...... :screwy:
Ray
-
Okay i agree just buy another / but where i live in San Diego and the only places i find i can get stuff for jet boats is Rex Marina and Hardin perfomance and nither show steering cables / thanks going to Havasu this Weekend so i am running out of time
-
http://www.easternmarineoutlet.com/Teleflex-Rack-Pinion-Steering-Kits/ (http://www.easternmarineoutlet.com/Teleflex-Rack-Pinion-Steering-Kits/)
i used this for price matching at west marine and it worked like a charm!
-
Okay i agree just buy another / but where i live in San Diego and the only places i find i can get stuff for jet boats is Rex Marina and Hardin perfomance and nither show steering cables / thanks going to Havasu this Weekend so i am running out of time
Hit up JP Marine in lakeside , He keeps them in stock.
-
You can also get a fitting that has a zerk on it for the outside threaded shaft. I have one on and it keeps the water out and well lubed.....