SoCal Jet Boats

Tech Talk => Engine Mechanical / Electrical => Topic started by: Sun Dance Kid on August 16, 2011, 01:10:28 PM

Title: Stroke Me
Post by: Sun Dance Kid on August 16, 2011, 01:10:28 PM

I hope some one can help me with this I am new to the Ford world and I have a 460 all stock and im wanting to stroke it with a 4 and half in crank with 6.7 I beam rods do I have to open the block up so the rods will clear ?

Title: Re: Stroke Me
Post by: IRRebel on August 17, 2011, 02:51:41 AM

Quote from: Sun Dance Kid on August 16, 2011, 01:10:28 PM

I hope some one can help me with this I am new to the Ford world and I have a 460 all stock and im wanting to stroke it with a 4 and half in crank with 6.7 I beam rods do I have to open the block up so the rods will clear ?

Nope.

Piston/cam selection will be important  as well as proper install to ensure proper valve/piston clearance, etc is all you should run into.

Ray

Title: Re: Stroke Me
Post by: Marcsrollin on August 17, 2011, 08:05:06 AM

I have a set of FORGED .030 over 22cc dish pistons that will work perfect in that combo. I ran them for one season and then decided to go higher compression. with a 76cc combustion chamber they make aprox. 11.5 to 1.

$200 + shipping!