SoCal Jet Boats
Tech Talk => Engine Mechanical / Electrical => Topic started by: GT Jets on March 28, 2009, 10:41:42 PM
-
When with pops to the Good Guys swap meet and car show today 8)
The weather was awsome and there were a ton of peeps and cars and crap for sale...I saw this setup on a Big inch Chevy and he called it a surge tank, I thought I've seen a lot, but never this before...I spaced and didn't get a picture, but it had a tank that looked to be about three or four quarts and was piped from the oil filter boss and back, like you would see on a remote oil cooler ar remote filter setup, basically it had a diaphram in it and would stabilize the oil pressure while running balls out.
The only one I have ever seen just went to the oil passages on the block and was made by Moroso...
Anyone seen this dealio, I'm more than a little curious about how it works, the largest benefit to me would be the added oil capacity..Thoughts?
GT
-
They sell them at jegs and summit, Its a presurized canister that provides oil pressure if there is a sudden lose of pressure. Make them mainly for circle track cars, drag cars, etc. The size is based on what the application is for.
http://www.jegs.com/p/Moroso/745635/10002/-1 (http://www.jegs.com/p/Moroso/745635/10002/-1)
-
poor mans dry sump, pop has one on his boss 9
(https://www.socaljetboats.com/cpg/albums/userpics/10041/DSC01225.JPG)
-
We use one on Circle track car. The best thing before you shut down motor you turn of Electronic return. Holds pressure in accumulator, Just before you restart motor you release pressure back to motor, The one we use has air pressure fitting on it and can be pressure raised at any time. Never a dry start. We use it on new motors to pressure lube complete motor on first start up.
-
These I believe only had one oil line, right? They are sold as accumulators only and are basically used like an oil pressure shock absorber for lack of a better term.
The one I was checking out had oil literally going into and back out of it so the oil in the tank was used as added capacity and still controlled oil pressure fluctuations, I thought it was pretty cool.
I have one of the smaller Moroso Accumulators with a ball valve and a pressure guage, it's about the size of a fire extinguisher, but it only has a line coming off the bottom and it just holds "static oil" and the oil just goes back and forth.
Here is what my warped mind was thinking... :-\
Build a three quart tank for oil with the diaphram deal going on at the top, have a coil of tubing running through the sump of the tank (making the total of external connections four) have an inlet oil pressure line, a feed line and a supply and return water line of say 1/2" tubing and have it thermostatically control oil temp and act as a pressure stabilizer, I think it would be the bomb for added capacity, oil pressure control and temp control in an endurance application... :sly:
GT
Just thinking out loud
-
Accumulators with auto reset ! very cool more info later !
-
SCJB Patent number two! How big is the pile of chips around the Mill building one Tom? ;D
Sounds like a great Idea, actually. Dealt with many accumulators before, but usually in diesel applications. Never thought of using one as a cooler, Oil pressure regulator, AND backup, albeit very temporary, oil pump. :sly:
Ray